3D Systems, Inc.
38
p/n: 15-D100, rev. D
4.4.7 Checking Slicing/Hatching Parameters
Once you have a job file, you can always trace back what
hatching parameters were used. To find this information:
1. Open the job in DMP Control.
2. Click on the far left bar to switch to the
Properties
window.
3. In the
Group parameters
subsection and the
Part
parameters
subsection the Slicesettings can be checked.
Here the slice settings will be displayed that are used to
generate this part.
Содержание DMP Flex 350
Страница 1: ...DMP Flex 350 Production printer User guide Original instructions ...
Страница 11: ...3D Systems Inc 6 p n 15 D100 rev D 1 x on the printer door 1 x on the scanner 2 1 4 Laser Safety Label ...
Страница 119: ...3D Systems Inc 114 p n 15 D100 rev D 8 BASIC REGULATIONS 8 1 EC Declaration of Conformity DoC ...