Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 341

Page: 341 / 402

The

Confirm Language Upgrade

page is displayed showing any languages that are being

installed.

5. Click the

Confirm

button.

A message is displayed to indicate if the language upgrade was successful or if it failed.

Deleting Languages

To delete languages from the language file:

1. Select the language file to upgrade by clicking the

Browse

button for the

Language File Upgrade

option, selecting the required language file and then clicking on the appropriate

Upgrade

button.

A list of available languages in this file is displayed.

2. Uncheck the boxes for each of the languages that you want to delete.

3. Click the

Upgrade Selected

button.

The

Confirm Language Upgrade

page is displayed. When deleting a language, the panel deletes

all languages and reinstalls only the languages required.

4. Click the

Confirm

button to confirm the languages being deleted.

See

Language

on page 269 for details of selecting the panel ‘System’ and ‘Idle State’ languages in the

browser.

See

Options

on page 113 for details of selecting the panel ‘System’ and ‘Idle State’ languages on the

keypad.

See also

Language

on page 269

17.12.2 File Manager Operations

Select

File > File Manager

A page displays showing details of the system configuration, language and trace files.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the browser

341

A6V10276959-d

11.2018

Summary of Contents for SPC4 Series



















































































































































































































































































































































































































Search results

Summary of Contents for SPC4 Series

Reviews:

Vanderbilt SPC4 Series, Installation & Configuration Manual, Page: 341 / 402

Search results

Summary of Contents for SPC4 Series

Reviews: