Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 165 | Manualshive

Page: 165 / 402

Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 165

16.14.7 Visual Indicators

This test is used to test all the pixels on the LCD Keypad and all the pixels and LED indicators on the
Comfort Keypad, Indicator module and Keyswitch.

To test a keypad:

1. Scroll to VISUAL IND.

2. Press SELECT.

3. Press ENABLE.

On the LCD keypad, two rows of continuously changing characters are displayed.

On the Comfort keypad, all the LED indicators are lit and all screen pixels are displayed.

1. Press BACK to disable the test.

2. Press BACK to exit.

16.14.8 Seismic Test

To perform a seismic test:

1. Scroll to TEST > SEISMIC TEST.

2. Press SELECT.

3. Select TEST ALL AREAS, or select an individual area to test.

4. If you select an individual area to test, you can select either TEST ALL ZONES or select a specific

seismic zone to test.

The message ‘SEISMIC TEST’ is display on the keypad while the test is being performed.

If the test fails, the message ‘SEISMIC FAIL’ is displayed. If the “i” or VIEW key is pressed, a list of
the failed zones is displayed which can be scrolled through.

If the test succeeds, ‘SEISMIC OK’ is displayed.

See also

Seismic Sensor Testing

16.15 Utilities

1. Scroll to UTILITIES and press SELECT.

2. Scroll to the desired programming option:

SYSTEM
SOFTWARE

To view the current software version.

DEFAULTS

To reset users or return the system to factory setting.

BACKUP
CONFIG

To back-up a configuration.

RESTORE
CONFIG

To restore a configuration.

SYSTEM
RESTART

To restart the system.

LICENSE

Enter a license number to change the SPC license key. The system does
not log or report a license change.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the keypad

© Vanderbilt 2018

165

A6V10276959-d

11.2018

«
...
163
164
165
166
167
...
»

Summary of Contents for SPC4 Series



















































































































































































































































































































































































































Reviews:

No comments