Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 237

Page: 237 / 402

17.10.1.4 X10 Config - Settings

The X10 settings page allows you to configure the operation of X10 on the panel.

1. Select

Configuration > Outputs > X-10

The following page will be displayed:

2. Activate the checkbox

Enable

to enable X10 operation on the panel.

3. Activate the checkbox

Log

to enable logging of all X10 events on the panel.

4. Click

Save

5. Click an alphabetic tab (A-P) to program X10 device triggers.

A list of programmable device triggers (1–16) will be presented for that alphabetic character.

Unit
number

This is the number (1–16) that is assigned to the device.

Active

This field indicates if the device is active or not.

Description

This field displays a description that is used to help identify the device – for
example, downstairs light (16 characters max).

Quick key

This field indicates if the X10 device activation can be toggled by entering a code
from the keypad.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the browser

237

A6V10276959-d

11.2018

Summary of Contents for SPC4 Series



















































































































































































































































































































































































































Search results

Summary of Contents for SPC4 Series

Reviews:

Vanderbilt SPC4 Series, Installation & Configuration Manual, Page: 237 / 402

Search results

Summary of Contents for SPC4 Series

Reviews: