Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 318

Page: 318 / 402

17.11.2.5 Exporting and Importing an ATS

ATS files have a .cxml extension. You must create the ATS in the SPC browser and export it before
you can import it to a system.

1. To export an ATS, go to

Communications > FlexC > FlexC ATS

2. In the

Configured ATS

table, locate the ATS to export and click the

Export ATS

button (green

arrow).

3. Save the file with the default filename

export_flexc.cxml

or rename the file.

4. To view the file, open in Notepad.

5. To import an ATS into the system, go to

Communications > FlexC > FlexC ATS

6. Scroll down to

Import ATS

7. Click the

Browse

button and select an ATS to import (.cxml file extension).

8. Click

Import ATS

The ATS displays in the

Configured ATS

table with the next available ID.

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the browser

318

A6V10276959-d

11.2018

Summary of Contents for SPC4 Series



















































































































































































































































































































































































































Search results

Summary of Contents for SPC4 Series

Reviews:

Vanderbilt SPC4 Series, Installation & Configuration Manual, Page: 318 / 402

Search results

Summary of Contents for SPC4 Series

Reviews: