Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 223

Page: 223 / 402

Area

Areas to which the zone is assigned.

LED

When enabled, the LED will come on when the PIR is activated.

PIR Sensor Pulses Filter

1 Pulse Count – 1 activation will cause an alarm

2 Pulse Count– 2 activations will cause an alarm

3 Pulse Count– 3 activations will cause an alarm

Time Filter Disabled – Any activation will cause an alarm, in particular, the
activation does not need to be present for a pulse duration.

Pet Immunity Filter

When enabled, will cause the PIR to ignore the motion caused by small animals.

PIR Sensitivity

The PIR has 5 sensitivity settings. Select the lowest sensitivity when the
background light levels are changeable.

Magnetic contact

To program the attributes for a magnetic contact:

1. Select

Configuration > Hardware > Wireless Settings.

2. Click the

Edit

button beside the desired magnetic contact.

3. Program the attributes.

Programmable attributes for Magnetic contact

Sensor

The number of the sensor as enrolled on the system (1 = first, 2 = second, etc).

Description

Text description of the sensor.

Sensor Type

The type of wireless sensor detected (e.g. magnetic contact, PIR).

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the browser

223

A6V10276959-d

11.2018

Summary of Contents for SPC4 Series



















































































































































































































































































































































































































Search results

Summary of Contents for SPC4 Series

Reviews:

Vanderbilt SPC4 Series, Installation & Configuration Manual, Page: 223 / 402

Search results

Summary of Contents for SPC4 Series

Reviews: