Vanderbilt SPC4 Series Installation & Configuration Manual Download Page 222

Page: 222 / 402

Edit a sensor

To edit a sensor:

1. Click the

Edit

button beside the sensor you want to edit.

2. Edit the sensor attributes.

3. Click

Save

to save your changes.

17.9.2.2 Set additional two-way wireless attributes

Depending on the sensor type, additional two-way wireless attributes can be configured by clicking the

Edit

button beside the sensor in the

Enrolled Sensors List

PIR

To program the attributes for a PIR:

1. Select

Configuration > Hardware > Wireless Settings

2. Click the

Edit

button beside the desired PIR.

Programmable attributes for PIR

Sensor

The number of the sensor as enrolled on the system (1 = first, 2 = second, etc).

Description

Text description of the sensor.

Sensor Type

The type of wireless sensor detected (e.g. magnetic contact, PIR).

Zone

The zone number to which the sensor has been enrolled.

Zone Type

The type of zone (e.g. Alarm, Entry/Exit).

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual

Engineer programming via the browser

222

A6V10276959-d

11.2018

Summary of Contents for SPC4 Series



















































































































































































































































































































































































































Search results

Summary of Contents for SPC4 Series

Reviews:

Vanderbilt SPC4 Series, Installation & Configuration Manual, Page: 222 / 402

Search results

Summary of Contents for SPC4 Series

Reviews: