Enrol a WRMT remote control
To enrol the WRMT:
1. In the SPC browser, select
Users > Wireless FOB
.
2. On the WRMT, press and hold both
SOS
buttons.
The LED blinks Red once and then Green.
3. Click
Refresh
on the
Wireless FOB
page to display the WRMT.
4. You can now assign the discovered WRMT to a system user.
To assign the WRMT to a user:
1. Go to
Users > Users
and click the
Edit
button beside the user you want to assign the WRMT to.
2. On the
Edit user settings
page, click the
Unknown Fob
button.
A list of unassigned fobs is displayed.
3. Click the
Add
button to assign the WRMT to the user.
4. On the
Edit user settings
page click
Save
.
Delete a WRMT remote control
To delete a WRMT:
1. Go to
Configuration > Hardware > Wireless > Transceiver list.
2. Click the
Delete
button beside the WRMT that you want to delete.
When you delete a WRMT from your system, you must also clear the internal registration in the WRMT
before you can re-use the WRMT.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
Engineer programming via the browser
© Vanderbilt 2018
226
A6V10276959-d
11.2018