25
Table 2 continuation
Parameters
Ural-43206-0111-61
Ural-43206-1151-61
Cardan drive
Exposed, with four shafts, joints on the needle bearings
Axles
Driving, combined axle case consists of a cast middle
part and half-axle casings pressed in it. The front axle is a
steering one, with constant velocity joints of disk-type
Main gear
Double, drive-through type, two conical spiral tooth
gears and two cylindrical skew gears. Main gears of all axles
are interchangeable
Differential is symmetrical, conical with four pinions.
Semi axles are fully offloaded, spline joint with the hub
gear ratio
6,77
Running gear
Frame
Stamped, riveted
Towing devices
In the front: rigid towing hooks, in the rear: double-
action towing unit
Truck suspension:
front
Conventional suspension on two semi-elliptic springs,
operating jointly with two bilateral hydraulic snubbers
rear
Conventional suspension on two semi-elliptic springs
with helpers, operating jointly with two bilateral hydraulic tel-
escopic snubbers
Wheels
а
) 533-310 (310-533) disk wheels with divided semi-
deep rim, having toroidal bead seats, centered at the chamfers
of the clamping holes, wheel offset 100 mm
Tires
According to the truck package:
а
) 425/85R21 156G, (
НС
16/PR16)
КАМА
-1260 or
model
КАМА
-1260-1 (with versatile tread pattern), pneumat-
ic, radial, tubed, wide-section, with heavy-duty tread pattern,
controllable tire pressure, max admissible load 39,46 kN
(4000 kgf) or
b) 425/85R21 156G, (
НС
16/PR16)
Бел
-1260, pneu-
matic, radial, tubed, with heavy-duty tread pattern, with con-
trollable tire pressure, max admissible load 39,46 kN (4000
kgf) or
c) 425/85R21, 156J (
НС
18/PR18) model
О
-184 pneu-
matic, tubed, conventional profile, with heavy-duty tread pat-
tern, adjustable tire pressure, max admissible load 39,46 kN
(4000 kgf)