28
Table 2 ending
Parameters
Ural-43206-0111-61
Ural-43206-1151-61
Winch*
4
Drum-type, with worm reduction gear and band brake
driven via cardan shaft from the auxiliary power take-off.
Rope working length 60 m, rope dia. 17.5 mm. Rope reversing
is possible. Pulling power on the third rope winding layer
68,6-88,2 kN (7-9 tf) limited by the guard pin. The mass of the
winch with the rope is 420 kg
Winch unit*
4
Rope-type, single-groove
Tire pressure control system
Air is supplied via two-wire diagram. Tire pressure in-
flation, deflation and adjustment are separate for front and rear
axles tires. Adjustment and control is carried out from the
driver's cab
* Mass when operating on V category roads
*
1
For trucks and chassis with a winch.
*
2
Mass parameters allowable by the units and assemblies (agreed with the URAL Automobile Works OE
JSC when making up «Protocol of using chassis on the customer product»). In addition, for some modifi-
cations, front axle load increases to 6500 kg, GVW increases to 22 500 kg.
*
3
Reference fuel consumption is defined as per GOST 20306-90 and serves to determine the truck tech-
nical condition and is not an operational standard.
*
4
Installed upon request
Overall dimensions of the trucks are shown in Fig. 6-16. The dimensions marked by an
asterisk are given for trucks of fully loaded mass.
Fig. 6 – Ural-4320-0911-60 truck overall dimensions
