193
Description
Technical requirements
Recommended equipment,
accessories and tools
Wheel ar-
rangement
4
х
4
6
х
6
Check and adjust head-
lamps, if required (see sub-
section «Lighting and Sig-
naling System»)
Adjust headlamps on
the unloaded truck placed
on an even horizontal
ground
Screwdriver,
screen
with special marks
+
+
Check variable voltage
See subsection «Elec-
trical equipment. Genera-
tor»
Voltmeter of accuracy
class 1.0 with a scale of 0-
30 V, screwdriver
+
+
Check condition of elec-
tricity cables insulation and
their fastening
Ditto
Pliers,
screwdriver,
knife, insulating tape
+
+
Cab, hood and fenders assembly and platform body
Check and tighten fas-
tening of cabin, platform
body and hood and fenders
assembly, if need be
Fastening should be
tight
Wrenches
10x12,
11x13, 17x19, 22x24
+
+
Check the condition of
rubber cushions
Cracks and breaks are
not allowed
+
+
Special equipment
Check the power take-off
case fastening to the gearbox
case and oil pump fastening to
the power take-off case (if
available)
Fastening should be
tight
Wrench 14x17
+
+
Check
Auxiliary
PTO
pump operability (let auxilia-
ry PTO work for 10 minutes
and check its pump operation
(if available))
+
+
Disconnect and blow the
brake chambers pressuriza-
tion system piping with com-
pressed air
Piping clogging is not
allowed
Wrench, 14
х
17, com-
bination wrench 14
х
14,
Socket wrench10, air hose
from compressor
+
+
When operating with the
trailer, check the condition of
thread on the hook and nut of
towing unit. If hook and nut
have damaged thread, replace
them by the new ones
Thread
defor-
mation/damage is not al-
lowed
Wrench 22x24, box
wrench
24x27,
Socket
wrench 55, Wrench for
bleeding air from hydrau-
lic brakes, tire iron
+
+
Lubrication
Engine lubrication should
be carried out as per Engine
Operation Manual
