138
5.7 Cab, hood and fenders assembly and platform body
5.7.1 Cab is three-seat one, located behind the engine, with heat and noise insulation,
driver and passengers seats, ventilation and heating system, and windscreen heater, sun visors,
windscreen wiper, windscreen washer, rear view mirrors on the left and right sides, wide-angle
and side-view mirrors.
Adjust the spherical mirrors to provide the visibility zones as per Fig. 111, 112, 113,
having slackened the bolts fastening spherical mirrors and their holders; then re-fix the bolts se-
curely upon the adjustment.
The cab is fastened to the chassis frame in four points on rubber pads. When the chassis
frame deformation occurs, the flexible fastening protects the cab parts from overstress.
1,4-rear-view mirrors (left, right); 2- road surface visibility zone; 3- driver’s eye point
Figure 111 - Visibility Zones Through Exterior Rear-View Mirrors (II class)
1, 4- wide-angle mirrors; 2- road surface visibility zone; 3- driver’s eye point
Figure 112 - Visibility Zone Through Wide-Angle Mirror (IV class)
1- mirror; 2- road surface visibility zone; 3- driver’s eye point
Figure 113 - Visibility Zone Through Side-View Mirror (V class)
