AB0118
R13006
AB0069
AB0119
W02044
H01002
H01140
D Squib
Spiral
Cable
Airbag
Sensor
Assembly
E1
Tc
ACC
ON
or
DTC B0101/14
DLC1
→ ←
D+
D-
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
DI-377
531
Author:
Date:
2001 SIENNA (RM787U)
3
Check airbag sensor assembly.
PREPARATION:
(a)
Connect the connector to the airbag sensor assembly.
(b)
Using a service wire, connect D+ and D- of the connector
(on the spiral cable side) between the spiral cable and the
steering wheel pad.
(c)
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(b)
Clear DTC stored in memory.
(See page
(c)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
(d)
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
(e)
Check DTC.
(See page
OK:
DTC B0101/14 is not output.
HINT:
Codes other than code B0101/14 may be output at this time, but
they are not relevant to this check.
NG
Replace airbag sensor assembly.
OK