A01813
P12710
New O-Ring
A07281
Manifold
Stay
A05188
Inlet Pipe
Rear
Plate
-
ENGINE MECHANICAL
CYLINDER HEAD
EM-67
1010
Author:
Date:
2001 SIENNA (RM787U)
10.
INSTALL RH EXHAUST MANIFOLD
(a)
Install a new gasket and the exhaust manifold with the 6
nuts. Uniformly tighten the nuts in several passes.
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
(b)
Install the heat insulator with 3 bolts.
(c)
Connect the oxygen sensor (bank 1 sensor 1) connector.
11.
INSTALL PS PUMP BRACKET
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
12.
INSTALL OIL DIPSTICK AND GUIDE
(a)
Install a new O-ring to the dipstick guide.
(b)
Apply soapy water to the O-ring.
(c)
Push in the dipstick guide end into the guide hole of the
No.1 oil pan.
(d)
Install the dipstick guide with the bolt.
Torque: 8.0 N·m (80 kgf·cm, 69 in.·lbf)
(e)
Install the dipstick.
13.
INSTALL LH EXHAUST MANIFOLD
(a)
Install a new gasket and the exhaust manifold with the 6
nuts. Uniformly tighten the nuts in several passes.
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
(b)
Install the exhaust manifold stay with the bolt and nut. Al-
ternately tighten the bolt and nut.
Torque: 20 N·m (200 kgf·cm, 14 ft·lbf)
(c)
Install the heat insulator with 3 bolts.
(d)
Connect the oxygen sensor (bank 2 sensor 1) connector.
14.
INSTALL WATER INLET PIPE
(a)
Install a new O-ring to the water inlet pipe.
(b)
Apply soapy water to the O-ring.
(c)
Connect the water inlet pipe to the water inlet.
(d)
Install the bolt holding the water inlet pipe to the cylinder
head.
Torque: 19.5 N·m (200 kgf·cm, 14 ft·lbf)
15.
INSTALL CYLINDER HEAD REAR PLATE
Torque: 8.0 N·m (80 kgf·cm, 69 in.·lbf)
16.
INSTALL ENGINE WIRE PROTECTOR
17.
INSTALL CAMSHAFT TIMING OIL CONTROL VALVES
18.
INSTALL CAMSHAFT POSITION SENSORS
