I19502
1
2
6
5
-
BODY ELECTRICAL
POWER WINDOW CONTROL SYSTEM
BE-69
1587
Author:
Date:
2001 SIENNA (RM787U)
(d)
Reverse the polarity and check that pulse is generated.
If operation is not as specified, replace the motor.
NOTICE:
If connecting the wire harness wrongly, the sensor might
be damaged so caution is necessary.
12.
INSPECT JAM PROTECTION FUNCTION
NOTICE:
Never, ever be caught any part of your body when check-
ing.
HINT:
In case of performing resetting of the limit switch, do checking
after repeating up and down of the glass with automatic opera-
tion.
(a)
Confirmation of AUTO up operation:
Confirm that the window will be fully close with AUTO up
operation.
(b)
Checking of the operation of the jam protection function:
(1)
Move up the window with AUTO up operation and
check that the window will go down when it touches
the handle of the hammer stetted.
(2)
Confirm that the window will then stop going down
about 200 mm.
HINT:
In case of removing the glass, glass guide, regulator and etc.
be sure to perform checking of the jam protection function.
If the jam protection is not function properly, adjust power win-
dow motor reset switch and pulse switch.