H02669
Protective Tape
H02670
H02671
Protective Tape
-
BODY
SLIDE DOOR GLASS
BO-69
1746
Author:
Date:
2001 SIENNA (RM787U)
6.
REMOVE SLIDE DOOR GLASS
(a)
Push a piano wire through from the interior.
(b)
Tie both wire ends to wooden blocks or similar object.
HINT:
Apply protective tape to the outer surface to keep the surface
from being scratched.
NOTICE:
When separating the glass, take care not to damage the
paint and exterior.
(c)
Cut the adhesive by pulling the piano wire around it.
HINT:
Cut the adhesive areas as shown in the illustration, leaving the
adhesive where the clips are.
(d)
Push the piano wire through as shown in the illustration,
cut off the adhered part to the clips.
(e)
Remove the glass.
NOTICE:
Leave as much of the adhesive on the body as possible
when cutting off the glass.
