AB0118
R13006
AB0119
FI1390
H01003
H01136
D Squib
Spiral
Cable
Airbag
Sensor
Assembly
E1
Tc
ACC
ON
or
DTC B0100/13
→
←
DLC1
DI-374
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
528
Author:
Date:
2001 SIENNA (RM787U)
4
Check D squib.
PREPARATION:
(a)
Turn the ignition switch to LOCK.
(b)
Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c)
Connect the steering wheel pad connector.
(d)
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(b)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(c)
Clear the DTC stored in memory (See page
).
(d)
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(e)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(f)
Check the DTC (See page
OK:
DTC B0100/13 is not output.
HINT:
Codes other than code B0100/13 may be output at this time, but
they are not relevant to this check.
NG
Replace steering wheel pad.
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
