IN0002
Example:
-
INTRODUCTION
REPAIR INSTRUCTIONS
IN-7
7
Author:
Date:
2001 SIENNA (RM787U)
(m)
Installation and removal of vacuum hose:
(1)
When disconnecting vacuum hoses, use tags to
identify how they should be reconnected to.
(2)
After completing a job, double check that the vacu-
um hoses are properly connected. A label under the
hood shows the proper layout.
(n)
Unless otherwise stated, all resistance is measured at an
ambient temperature of 20
°
C (68
°
F). Because the resis-
tance may be outside specifications if measured at high
temperatures immediately after the vehicle has been run-
ning, measurement should be made when the engine has
cooled down.