LU01V-03
P12413
P12392
SST
P12475
Cut Position
P12473
SST
LU-14
-
LUBRICATION
OIL PUMP
1204
Author:
Date:
2001 SIENNA (RM787U)
REPLACEMENT
REPLACE CRANKSHAFT FRONT OIL SEAL
HINT:
There are 2 methods ((a) and (b)) to replace the oil seal which
are as follows:
(a)
If the oil pump is removed from the cylinder block.
(1)
Using a screwdriver, pry out the oil seal.
(2)
Using SST and a hammer, tap in a new oil seal until
its surface is flush with the oil pump body edge.
SST
09223-00010
(3)
Apply MP grease to the oil seal lip.
(b)
If the oil pump is installed to the cylinder block.
(1)
Using a knife, cut off the oil seal lip.
(2)
Using a screwdriver, pry out the oil seal.
NOTICE:
Be careful not to damage the crankshaft. Tape the screw-
driver tip.
(3)
Apply MP grease to a new oil seal lip.
(4)
Using SST and a hammer, tap in the oil seal until its
surface is flush with the oil pump body edge.
SST
09223-00010