Toyota RM787U, Service And Repair Manual, Page: 804 / 1976

H01020
H02139
AB0118 AB0119
R13006 H01079
H02208
P/T Squib (RH)
Airbag
Sensor
Assembly
PR+
PR-
ACC
or
DTC B0132/61
ON
→ ←
E1
Tc
DLC1
- DIAGNOSTICS SUPPLEMENTAL RESTRAINT SYSTEM
DI-435
589
Author: Date:
2001 SIENNA (RM787U)
3 Check airbag sensor assembly.
PREPARATION:
(a)
Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect PR+ and PR- of the con-
nector (on the seat belt pretensioner side) between the
seat belt pretensioner (RH) and the airbag sensor assem-
bly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to ACC or ON and wait at least for
20 seconds.
(b) Clear the DTC stored in memory
(See step 5 on page
DI-358 ).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e) Check the DTC (See page DI-358 ).
OK:
DTC B0132/61 is not output.
HINT:
Codes other than code B0132/61 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK