P12716
SST
SST
P18802
B04136
B04137
P20050
Pry
-
LUBRICATION
OIL PUMP
LU-1 1
1201
Author:
Date:
2001 SIENNA (RM787U)
(b)
Insert the blade of SST between the No.1 and No.2 oil
pans, and cut off applied sealer and remove the No.1 oil
pan.
SST
09032-00100
NOTICE:
Be careful not to the damage the No.2 oil pan contact
surface of the No.1 oil pan.
Be careful not to damage the No.2 oil pan flange.
14.
REMOVE OIL STRAINER
Remove the bolt, 2 nuts, oil strainer and gasket.
15.
REMOVE NO.1 OIL PAN
(a)
Remove the 2 bolts and No.1 exhaust pipe support brack-
et.
(b)
Remove the 17 bolts and 2 nuts.
(c)
Using a screwdriver, remove the oil pan by prying the por-
tions between the cylinder block and oil pan.
NOTICE:
Be careful not to damage the contact surfaces of the cylin-
der block and oil pan.
16.
REMOVE BAFFLE PLATE FROM NO.1 OIL PAN
17.
REMOVE CRANKSHAFT POSITION SENSOR
18.
REMOVE OIL PUMP
(a)
Remove the 9 bolts.
(b)
Remove the oil pump by prying a screwdriver between the
oil pump and main bearing cap.
(c)
Remove the O-ring.
