BO3YE-01
H02611
H03598
: 5 Clips
BO-162
-
BODY
SEAT BELT PRETENSIONER
1839
Author:
Date:
2001 SIENNA (RM787U)
INSTALLATION
NOTICE:
Never use seat belt pretensioner from another ve-
hicle. When replacing parts, replace them with new
parts.
Make sure that the front seat outer belt is installed to
the specified torque.
If the front seat outer belt has been dropped, or there
are cracks, dents or other defects in the case or con-
nector, replace the front seat outer belt with a new
one.
When installing the front seat outer belt, take care that
the wiring does not interfere with other parts and is
not pinched between other parts.
1.
INSTALL RETRACTOR OF FRONT SEAT OUTER BELT
(a)
Install the retractor of front seat outer belt with the 2 bolts.
Torque:
Upper bolt: 21 N·m (210 kgf·cm, 15 ft·lbf)
Lower bolt: 43 N·m (440 kgf·cm, 32 ft·lbf)
(b)
w/ Seat belt warning:
Connect the retractor switch connector.
(c)
Connect the pretensioner connector as shown in the il-
lustration.
2.
INSTALL LOWER CENTER PILLAR GARNISH
(a)
Install the lower center pillar garnish.
(b)
Install the front seat outer belt floor anchor with bolt.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
3.
INSTALL SLIDE DOOR SCUFF PLATE
