P12982
Length = 240 mm (9.45 in.)
Join
Line
Join
Line
Length = 460 mm
(18.11 in.)
P20029
SST
P18816
EM-26
-
ENGINE MECHANICAL
TIMING BELT
969
Author:
Date:
2001 SIENNA (RM787U)
Remove the backing paper from a new gasket and
install the gasket evenly to the part of the timing belt
cover shaded black in the illustration.
NOTICE:
When joining 2 gaskets, do not leave a gap between them.
Cut off any excess gasket.
After installing the gasket, press down on it so that
the adhesive firmly sticks to the timing belt cover.
(b)
Install the timing belt cover with the 4 bolts.
Torque: 8.5 N·m (85 kgf·cm, 74 in.·lbf)
15.
INSTALL CRANKSHAFT PULLEY
(a)
Align the pulley set key with the key groove of the pulley,
and slide on the pulley.
(b)
Using SST, install the pulley bolt.
SST
09213-54015 (91651-60855), 09330-00021
Torque: 215 N·m (2,200 kgf·cm, 159 ft·lbf)
16.
INSTALL NO.2 GENERATOR BRACKET
Install the generator bracket with the pivot bolt and nut. Do not
tighten the bolt yet.
Torque: (Nut): 28 N·m (290 kgf·cm, 21 ft·lbf)
17.
INSTALL NO.2 RH ENGINE MOUNTING BRACKET,
ENGINE MOVING CONTROL ROD AND RH ENGINE
MOUNTING STAY (See page
)
18.
CONNECT DLC1 TO NO.2 RH ENGINE MOUNTING
BRACKET
19.
CONNECT GROUND STRAP CONNECTORS
20.
CONNECT ENGINE COOLANT RESERVOIR HOSE TO
WATER OUTLET
21.
INSTALL PS PUMP DRIVE BELT
22.
INSTALL GENERATOR DRIVE BELT
23.
INSTALL RH FENDER APRON SEAL
24.
INSTALL RH FRONT WHEEL
25.
INSTALL OUTER FR COWL TOP PANEL ASSEMBLY
(See page
)
26.
VEHICLE ROAD TEST
Check for abnormal noise, shock, slippage, correct shift points
and smoothly operation.
