P10827
Turn
SST (A)
SST (C)
B00892
Turn
SST (A)
SST (B)
S05073
B00893
SST
-
CHARGING
GENERATOR
CH-9
1248
Author:
Date:
2001 SIENNA (RM787U)
(e)
To loosen the pulley nut, turn SST (A) in the direction
shown in the illustration.
NOTICE:
To prevent damage to the rotor shaft, do not loosen the
pulley nut more than one-half of a turn.
(f)
Remove the generator from SST (C).
(g)
Turn SST (B), and remove SST (A and B).
(h)
Remove the pulley nut and pulley.
5.
REMOVE RECTIFIER END FRAME
(a)
Remove the 4 nuts and cord clip.
(b)
Using SST, remove the rectifier end frame.
SST
09286-4601 1
(c)
Remove the generator washer.
6.
REMOVE ROTOR FROM DRIVE END FRAME