H02632
H02633
H07346
H11101
H11102
Adjusting Bolt
Stopper Window
Rib
BO-24
-
BODY
SLIDE DOOR
1701
Author:
Date:
2001 SIENNA (RM787U)
6.
ADJUST FRONT LOCK STRIKER
(a)
Check that the door fit and door lock linkage are adjusted
correctly.
(b)
Loosen the striker mounting screw.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
(c)
Using a plastic hammer, tap the striker to adjust.
7.
ADJUST REAR LOCK STRIKER
(a)
Check that the door fit and door lock linkage are adjusted
correctly.
(b)
Loosen the striker mounting screw.
Torque: 23 N·m (230 kgf·cm, 17 ft·lbf)
(c)
Using a plastic hammer, tap the striker to adjust.
8.
ADJUST CONTROL CABLE TENSION
(a)
Pull on the rear side cable to provide temporary tension
and move roller hinge forward to front of the center rail.
(b)
Open the door 100 mm (3.94 in.).
(c)
Using a socket wrench, rotate the adjusting bolt clockwise
until hole appears in stopper window on the power slide
door drive unit. Then insert a screwdriver to hole.
HINT:
On the drum viewed through the stopper window, there is one
part where a rib cannot be seen at all as shown in the illustra-
tion.
