N10230
Primer G
Dam
Primer G
H02664
a
a
B
a - a
b - b
b
B
A
A
b
N08495
BO2821
BO-64
-
BODY
WINDSHIELD
1741
Author:
Date:
2001 SIENNA (RM787U)
9.
COAT CONTACT SURFACE OF GLASS WITH PRIMER
”G”
(a)
Using a brush or a sponge, coat the edge of the glass and
the contact surface with primer G.
(b)
Before the primer dries, wipe it off with a clean shop rag.
NOTICE:
Let the primer coating dry for 3 minutes or more.
Do not keep any of the opened primer G for later use.
10.
APPLY ADHESIVE
(a)
Cut off the tip of the cartridge nozzle.
Part No. 08850-00801 or equivalent
HINT:
After cutting off the tip, use all adhesive within the time de-
scribed in the table below.
Temperature
Tackfree time
35
°
C (95
°
F)
15 minutes
20
°
C (68
°
F)
100 minutes
5
°
C (41
°
F)
8 hours
(b)
Load the cartridge into the sealer gun.
(c)
Coat the glass with adhesive as shown.
A: 12.0 mm (0.472 in.)
B: 8.0 mm (0.315 in.)
11.
INSTALL GLASS
HINT:
Check that the dam is attached to the body panel as shown in
the illustration.
(a)
Position the glass so that the reference marks are lined
up, and press in gently along the rim.
(b)
Using a spatula, apply adhesive on the glass rim.
