AB0158
SST
Battery
H02612
SST
SST
-
BODY
SEAT BELT PRETENSIONER
BO-159
1836
Author:
Date:
2001 SIENNA (RM787U)
CAUTION:
The front seat outer belt is very hot when the seat belt
pretensioner is activated, so leave it alone for at least
30 minutes after activation.
Use gloves and safety glasses when handling a front
seat outer belt with activated seat belt pretensioner.
Always wash your hands with water after completing
the operation.
Do not apply water, etc. to a front seat outer belt with
activated seat belt pretensioner.
When scrapping a vehicle, activate the seat belt preten-
sioner and scrap the vehicle with activated front seat out-
er belt still installed.
2.
ACTIVATION WHEN DISPOSING OF FRONT SEAT
OUTER BELT ONLY
NOTICE:
When disposing of the front seat outer belt (with seat
belt pretensioner) only, never use the customer’s ve-
hicle to activate the seat belt pretensioner.
Be sure to follow the procedure given below when ac-
tivating the seat belt pretensioner.
HINT:
Have a battery ready as the power source to activate the seat
belt pretensioner.
(a)
Remove the front seat outer belt.
(See page
HINT:
Cut the belt near the seat belt retractor.
(b)
Check functioning of SST.
(See step 1-(a))
SST
09082-00700, 09082-00740
(c)
Install the SST.
(1)
Connect the 2 SST each other, then connect them
to the seat belt pretensioner.
SST
09082-00700, 09082-00740
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
