H02368
H02678
Protective Tape
H02679
H02680
Protective Tape
BO-84
-
BODY
BACK DOOR GLASS
1761
Author:
Date:
2001 SIENNA (RM787U)
6.
REMOVE REAR WIPER ARM
Remove the nut and wiper arm.
7.
REMOVE BACK DOOR GLASS
(a)
Push piano wire through from the interior.
(b)
Tie both wire ends to wooden blocks or similar object.
HINT:
Apply protective tape to the outer surface to keep the surface
from being scratched.
NOTICE:
When separating the glass, take care not to damage the
paint and exterior.
(c)
Cut the adhesive by pulling the piano wire around it.
HINT:
Cut the adhesive areas as shown in the illustration, leaving the
adhesive where the clips are.
(d)
Let the piano wire pass as shown in the illustration, cut off
the adhered part to the clips.
NOTICE:
Do not damage the glass retainers.
(e)
Remove the glass.
NOTICE:
Leave as much of the adhesive on the body as possible
when cutting off the glass.
