Slave Reset
(Momentary
Interruption)
DE
01 *5
(Communication
Control)
After engine is started, slave com-
ponent was disconnected from sys-
tem.
Check harness for power supply
of component shown by auxiliary
code.
Check harness for communica-
tion system of component shown by
auxiliary code.
Master Error
DF
01 *6
(Communication
Control)
Due to defective condition ofradio
receiver assembly, master function
is switched to audio equipment.
Error occurs in communication be-
tween sub-master (audio) andradio
receiver assembly.
Check harness for power supply
of radio receiver assembly assem-
bly.
Check harness for communica-
tion system of radio receiver as-
sembly .
Check harness for communica-
tion system between radio receiver
assembly and sub-master compo-
nent.
Registration
Completion
Instruction
Error
E0
01
(Communication
Control)
”Registration Completion Instruc-
tion” command fromradio receiver
assembly cannot be received.
Since this DTC is provided for en-
gineering purpose, it may be de-
tected when no actual failure exists.
Audio
processor ON
error
E1
01 *2
(Communication
Control)
While source equipment is operat-
ing, AMP output is stopped.
Check harness for power supply
of radio receiver assembly assem-
bly.
Check harness for communica-
tion system of radio receiver as-
sembly.
ON/OFF
Instruction
Parameter
Error
E2
01
(Communication
Control)
Error occurs in ON/OFF controlling
command from radio receiver as-
sembly assembly.
Replace radio receiver assembly
.
Registration
Request
Transmission
E3
01
(Communication
Control)
Registration Request command is
output from slave component.
Receiving Connection Check
Instruction, Registration Request
command is output from sub-mas-
ter component.
Since this DTC is provided for en-
gineering purpose, it may be de-
tected when no actual failure exists.
Plural Frame
Abort
E4
01
(Communication
Control)
Since this DTC is provided for en-
gineering purpose, it may be de-
tected when no actual failure exists.
Plural frame transmission is
aborted.
AM Tuner Error
43
60
(Radio receiver
assembly)
Replace radio receiver assembly.
Abnormal condition is detected in
AM tuner.
Inspect radio receiver assembly.
FM Tuner Error
44
60
(Radio receiver
assembly)
Replace radio receiver assembly.
Abnormal condition is detected in
FM tuner.
Mechanical or
Media Error
40
61
(Cassette
switch)
Inspect cassette tape.
Malfunction due to mechanical fail-
ure is identified. Or, cassette tape is
cut or entangled.
EJECT
Malfunction
41
61
(Cassette
switch)
Malfunction due to mechanical fail-
ure.
Replace radio receiver assembly.
BE-120
-
BODY ELECTRICAL
AUDIO SYSTEM
1638
Author:
Date:
2001 SIENNA (RM787U)