H02653
Adhesive Tape
-
BODY
BODY OUTSIDE MOULDING
BO-51
1728
Author:
Date:
2001 SIENNA (RM787U)
(b)
If reusing moulding:
Clean the moulding.
(1)
Using a heat light, heat the moulding to 20 - 30
°
C
(68 - 86
°
F).
NOTICE:
Do not heat moulding excessively.
(2)
Remove the adhesive tape from the moulding.
(3)
Wipe off stains with cleaner.
(4)
Apply new adhesive tape to the moulding as shown
in the illustration.
(c)
Install the moulding.
(1)
Using a heat light, heat the door and moulding.
Body: 40 - 60
°
C (104 - 140
°
F)
Moulding: 20 - 30
°
C (68 - 86
°
F)
NOTICE:
Do not heat moulding excessively.
(2)
Lift the moulding release sheet from the face of
moulding.
NOTICE:
When the moulding release sheet is removed, make sure
that no dirt or dust can get on to the uncoated area.
(3)
Install the moulding to the door.
(4)
Install the nut.
4.
INSTALL OUTSIDE QUARTER MOULDING
Install the moulding with the 3 screws.
5.
INSTALL BACK DOOR OUTSIDE MOULDING
(a)
Clean the door mounting surface.
(1)
Using a heat light, heat the door mounting surface
to 40 - 60
°
C (104 - 140
°
F).
NOTICE:
Do not heat door excessively.
(2)
Remove the adhesive tape from the door.
(3)
Wipe off stains with cleaner.
(b)
If reusing moulding:
Clean the moulding.
(1)
Using a heat light, heat the moulding to 20 - 30
°
C
(68 - 86
°
F).
NOTICE:
Do not heat moulding excessively.
(2)
Remove the adhesive tape from the moulding.
(3)
Wipe off stains with cleaner.
