SA0QU-01
F02240
F02241
F02242
SA-40
-
SUSPENSION AND AXLE
FRONT STABILIZER BAR
1327
Author:
Date:
2001 SIENNA (RM787U)
REMOVAL
1.
REMOVE LEFT AND RIGHT FRONT WHEELS
Torque: 104 N·m (1,050 kgf·cm, 77 ft·lbf)
2.
REMOVE LEFT AND RIGHT STABILIZER BAR LINKS
Remove the 4 nuts and 2 links.
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
HINT:
If the ball joint turns together with the nut, use a 5 mm
hexagon wrench to hold the stud.
At the time of installation, set the green colored stabilizer
bar link at LH side and white one at RH side.
3.
DISCONNECT TIE ROD ENDS FROM STEERING
KNUCKLE (See page
)
4.
REMOVE LEFT AND RIGHT BRACKETS AND BUSH-
INGS
Remove the 4 bolts, 2 brackets and bushings.
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
HINT:
At the time of installation, install the elastic bushing to the inside
of the bushing on the stabilizer bar.
5.
REMOVE PS GEAR ASSEMBLY SET BOLTS AND
NUTS
Torque: 181 N·m (1,850 kgf·cm, 134 ft·lbf)
6.
REMOVE STABILIZER BAR
Remove the stabilizer bar from the left hand side with the PS
gear assembly raised.
NOTICE:
Be careful not to damage the pressure feed tube.
HINT:
At the time of installation, set the stabilizer bar with white col-
ored side at LH side.
