B09710
Example:
Correct
Wrong
Z13950
Example:
IN-12
-
INTRODUCTION
FOR ALL OF VEHICLES
12
Author:
Date:
2001 SIENNA (RM787U)
(d)
STEERING WHEEL PAD (with Airbag)
(1)
When removing the steering wheel pad or handling
a new steering wheel pad, it should be placed with
the pad top surface facing up.
In this case, care should be taken to place it so the
connector will not be damaged. In addition do not
store a steering wheel pad on top of another one.
Storing the pad with its metallic surface up may lead
to a serious accident if the airbag inflates for some
reason.
(2)
Never measure the resistance of the airbag squib.
(This may cause the airbag to deploy, which is very
dangerous.)
(3)
Grease should not be attached to the steering
wheel pad and the pad should not be cleaned with
detergents of any kind.
(4)
Store the steering wheel pad where the ambient
temperature remains below 93
°
C (200
°
F), without
high humidity and away from electrical noise.
(5)
When using electric welding, first disconnect the air-
bag connector (yellow color and 2 pins) under the
steering column near the combination switch con-
nector before starting work.
(6)
When disposing of a vehicle or the steering wheel
pad alone, the airbag should be deployed using an
SST before disposal (See page
Carry out the operation in a safe place away from
electrical noise.