AT4657
D00680
AT3417
OK if hot
Add if hot
AT4252
0 - 1 mm (0 - 0.04 in.)
-
DIAGNOSTICS
AUTOMATIC TRANSAXLE
DI-163
317
Author:
Date:
2001 SIENNA (RM787U)
(c)
Replace the ATF.
(1)
Remove the drain plug and drain the fluid.
(2)
Reinstall the drain plug securely.
(3)
With the engine OFF add new fluid through the oil
filler pipe.
Fluid type: ATF D-II or DEXRON
®
III (DEXRON
®
II)
Capacity: 4.75 liters (5.0 US qts, 4.2 Imp. qts)
(4)
Start the engine and shift the shift lever into all posi-
tions from P to L position and then shift into P posi-
tion.
(5)
With the engine idling, check the fluid level. Add
fluid up to the COOL level on the dipstick.
(6)
Check the fluid level at the normal operating tem-
perature, 70 - 80
°
C (158 - 176
°
F), and add as
necessary.
NOTICE:
Do not overfill.
(d)
Check the fluid leaks.
Check for leaks in the transaxle.
If there are leaks, it is necessary to repair or replace O-rings,
gasket, oil seals, plugs or other parts.
(e)
Inspect and adjust the throttle cable.
(1)
Check that the accelerator pedal is fully released.
(2)
Check that the inner cable is not slack.
(3)
Measure the distance between the outer cable end
and stopper on the cable.
Standard distance: 0 - 1 mm (0 - 0.04 in.)
If the distance is not the standard, adjust the cable by the ad-
justing nuts.
