H02438
H02439
H02440
Riveter
Mandrel
H02441
Riveter
Riveter
H02442
Riveter
BO-22
-
BODY
SLIDE DOOR
1699
Author:
Date:
2001 SIENNA (RM787U)
(d)
Even if flange is taken off, continue drilling and push out
remaining fragments with the drill.
(e)
Remove the slide door lock control assembly.
HINT:
At the time of reassembly, please refer to the following items.
Apply MP grease to the sliding surface of the slide door
lock control assembly.
Using an air riveter or hand riveter, install the slide door
lock control assembly to the door frame with the rivets.
NOTICE:
At the time of reassembly, please refer to the following
items.
Do not prize a riveter, as riveter is damaged, it is not
tightened and the mandrel is bent.
Do not tilt the riveter and disconnect the rivet from the
material while handling a riveter, as the materials are
not tightened firmly.
Install the rivet while attaching materials, as they are
not tightened firmly.
