P12808
Cut Position
P12810
SST
-
ENGINE MECHANICAL
CYLINDER BLOCK
EM-107
1050
Author:
Date:
2001 SIENNA (RM787U)
(b)
If the rear oil seal retainer is installed to the cylinder block.
(1)
Using a knife, cut off the oil seal lip.
(2)
Using a screwdriver, pry out the oil seal.
NOTICE:
Be careful not to damage the crankshaft. Tape the screw-
driver tip.
(3)
Apply MP grease to a new oil seal lip.
(4)
Using SST and a hammer, tap in the oil seal until its
surface is flush with the rear oil seal retainer edge.
SST
09223-15030, 09950-70010 (09951-07100)
