H11966
H11967
H11968
AB0158
SST
Battery
-
SUPPLEMENTAL RESTRAINT SYSTEM
SIDE AIRBAG ASSEMBLY
RS-45
1495
Author:
Date:
2001 SIENNA (RM787U)
(1)
Install the 2 nuts to the side airbag assembly.
(2)
Wind the wire harness around the stud bolts of the
side airbag assembly as shown in the illustration.
(3)
Position the side airbag assembly inside the tire
with the airbag deployment direction facing inside.
Tire size: Must exceed the following dimensions-
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION:
Make sure the wire harness is tight. It is very danger-
ous when a loose wire harness results in the side air-
bag assembly coming free due to the shock from the
airbag deploying.
Always tie down the side airbag assembly with the
airbag deployment side facing inside.
NOTICE:
The tire will be marked by the airbag deployment, so when
disposing of the airbag use a redundant tire.
(e)
Check functioning of the SST (See step 1-(a) on page
SST
09082-00700
