AB0118
R13006
AB0119
H01007
H01066
H01170
Airbag
Sensor
Assembly
Side Airbag Sensor
Assembly (RH)
E1
Tc
ACC
ON
or
DTC B1141/33
→
←
DLC1
DI-462
-
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
616
Author:
Date:
2001 SIENNA (RM787U)
10
Check side airbag sensor assembly (RH).
PREPARATION:
(a)
Turn the ignition switch to LOCK.
(b)
Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c)
Connect the side airbag sensor (RH) to the connector that
the side airbag sensor (LH) was connected to.
(d)
Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(b)
Clear the DTC stored in memory (See step 5 on page
(c)
Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d)
Turn the ignition switch to ACC or ON, and wait at least
for 20 seconds.
(e)
Check the DTC (See page
OK:
DTC B1141/33 is not output.
HINT:
Codes other than code B1141/33 may be output at this time, but
they are not relevant to this check.
NG
Replace side airbag sensor assembly (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
