Toro Reelmaster 5510 Series, Service Manual

Page: 151 / 662

Reverse Direction (continued)
manifold where the 2 internal check valves allow the hydraulic fluid to bypass the
rear wheel motors. Then the fluid flows to the front wheel motors, turning them
in the reverse direction. The reverse traction pressure is limited to 25,000 kPa
(3,625 psi) by the reverse traction relief valve (R4) located in the traction pump.
The fluid flowing from the wheel motors returns to the traction pump and is
continuously pumped through the closed loop traction circuit as long as the
traction pedal is pressed.
The charge circuit and flushing valve function the same in reverse as they do in
the forward direction.
Reelmaster ® 5410/5510/5610 Series Page 6–33 Hydraulic System: Hydraulic Flow Diagrams (5610-D)
15216SL Rev C