General Information
The
Operator’s Manual
provides information regarding the operation, general
maintenance, and maintenance intervals for your machine. Refer to the
Operator’s Manual
for additional information when servicing the machine.
Electrical Schematic and Wire Harness Drawings/Diagrams
The electrical schematics and wire harness drawings/drawings for Reelmaster
5410, 5410-G, 5410-D, 5510, 5510-G, 5510-D, 5610, and 5610-D machines are
located in
Appendix A (page A–1)
. Refer to these drawings when servicing
the electrical system on your machine.
Toro Electronic Controller (TEC)
g213677
Figure 194
1.
Fuse block
2.
Control arm
3.
TEC
The Reelmaster 5010 machines use a Toro Electronic Controller (TEC) to
manage the machine electrical functions. The controller is a microprocessor
controlled device that monitors the condition of various switches and sensors
(inputs) and then directs electrical power to control the appropriate machine
functions (outputs) based on the inputs. Communication between the TEC,
InfoCenter display, and engine ECU (if equipped) is provided by a CAN-bus
system. The status of inputs to the controller as well as outputs from the
controllers can be monitored with the InfoCenter display.
The TEC is located behind the control arm access cover next to the fuse block.
IMPORTANT
Before performing any welding on the machine, do the following to
prevent damaging the electrical system of the machine:
•
Disconnect the battery cables from the battery.
•
Disconnect the wire harness connector from the Toro Electronic Controller.
•
Disconnect the wire harness connectors from the engine ECU.
•
Disconnect the terminal connector from the alternator.
CAN-bus Communications
The TEC, Yanmar engine ECU (if equipped), and InfoCenter display used on the
Reelmaster 5010 machines communicate with each other on a CAN-bus system.
This system allows the traction unit to fully integrate all the different electrical
Reelmaster
®
5410/5510/5610 Series
Page 7–3
Electrical System: General Information
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
