Toro Reelmaster 5510 Series, Service Manual

Page: 17 / 662

Raising the Rear of the Machine
g186591
Figure 3
1. Rear wheel 2. Rear axle pivot bracket 3. Jack stand location
1. Set the parking brake and block the 2 front wheels with chocks to prevent
the machine from moving.
2. Position the jack securely at the center of the rear axle under the axle pivot
bracket. Lift the rear of the machine off the ground.
3. Position the jack stands under the frame to support the machine ( Figure 3 ).
Safety and Instructional Decals
Numerous safety and instruction decals are affixed to the traction unit and
cutting units of your Reelmaster. If any decal becomes illegible or damaged,
install a new decal. Decal part numbers are listed in your
Parts Catalog . Order
replacement decals from Authorized Toro Distributor.
Reelmaster ® 5410/5510/5610 Series Page 1–7 Safety: Safety and Instructional Decals
15216SL Rev C