Removing the Rear Wheel Motor (continued)
3. Loosen, but do not remove the locknut (item 9 in
) that secures
the wheel hub to the wheel motor.
4. Read the
General Precautions for Removing and Installing the Hydraulic
System Components (page 6–145)
.
IMPORTANT
Before lifting the machine with a jack, review and follow
Instructions (page 1–6)
.
5. Lift the machine with a jack to remove the rear wheel, support the machine
with jack stands.
6. Remove the rear wheel from the machine; refer to
(page 8–6)
.
7. Remove wheel hub from the rear wheel motor as follows:
IMPORTANT
Do not hit the wheel hub, wheel-hub puller, or wheel motor with a
hammer while removing or installing. Hammering can damage the
wheel motor.
A. Ensure that the locknut on the wheel motor shaft is loosened at least
2 turns.
B. Use a hub puller (refer to
Wheel Hub Puller (page 6–47)
) to loosen the
wheel hub from the wheel motor.
C. Remove the locknut and wheel hub from the motor shaft. Discard the
locknut.
D. Locate and retrieve the woodruff key (item 7 in
) from the
wheel motor shaft.
8. Clean the hydraulic hose ends and fittings on the wheel motor to prevent
contaminants from entering into the hydraulic system.
9. For assembly purposes, label all the hydraulic connections at the wheel
motor.
10. Loosen and remove the hydraulic tubes from the fittings on the wheel motor.
Allow the hoses to drain into a suitable container.
11. Install clean caps or plugs on the hydraulic hoses and fittings to prevent
system contamination.
12. Support the wheel motor to prevent it from falling during removal.
13. Remove the 4 bolts (item 10 in
) and 4 lock washers that secure
the wheel motor to the motor housing.
14. Remove the wheel motor from the machine.
15. If the hydraulic fittings are to be removed from the wheel motor, mark the
fitting orientation for assembly purposes. Remove the fittings from the wheel
motor and discard the O-rings from the fittings.
Hydraulic System: Service and Repairs
Page 6–180
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
