Groomer Reel
g220505
Figure 398
1.
Jam nut (4 each)
2.
Bolt (4 each)
3.
Shaft clamp (4 each)
4.
Groomer reel
Remove the groomer reel to replace individual groomer blades or replace the
shaft. The groomer reel can be reversed to provide additional blade life.
Removing the Groomer Reel
1. Park the machine on a clean and level surface, lower the cutting units
completely to the ground, shut off the engine, set the parking brake, and
remove the key from the key switch. If necessary, remove the cutting unit
from the machine; refer to the
Traction Unit Operator’s Manual
.
CAUTION
Contact with the reel or other cutting unit parts can result in personal
injury.
Use heavy gloves when handling the groomer reel.
2. Carefully remove the 4 jam nuts (item 1 in
), 4 bolts, and 4 shaft
clamps that secure the groomer reel to the output and stub shafts.
3. Lift the groomer reel from the cutting unit.
4. Inspect the seal, shields, bushing, and bearings for wear or damage.
Replace the components as necessary; refer to
Gear Box Assembly (page
and
Idler Assembly (page 11–11)
.
Reelmaster
®
5410/5510/5610 Series
Page 11–13
Universal Groomer (Optional): Service and Repairs
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
