Toro Reelmaster 5510 Series, Service Manual

Page: 554 / 662

Installing the Bedknife (continued)
g251663
Figure 334
5. Using a torque wrench and bedknife screw tool, tighten the 2 outer screws to
1 N∙m (10 in-lb) .
6. Working from the center of the bedknife toward each end, tighten screws
from 23 to 28 N∙m (200 to 250 in-lb) .
7. After installing the bedknife to the bedbar, grind the bedknife.
Grinding the Bedknife
g207291
Figure 335
1. Top angle 4. Front surface
2. Top surface 5. Front angle
3. Remove burr (without dulling sharp corner)
Bedknife Grinding Specifications
Bedknife Lip Height
Service Limit
Top Angle Front Angle
EdgeMax® Low HOC
Premium Low HOC
Standard Low HOC
5°
Extended EdgeMax® Low HOC
Extended Low HOC
10°
10°
EdgeMax® Standard HOC 5°
Standard Standard HOC
Heavy Duty Standard HOC
4.8 mm (0.190
inch)
10°
5°
Cutting Unit: Service and Repairs Page 9–24 Reelmaster ® 5410/5510/5610 Series
15216SL Rev C