Installing the Front Wheel Motor (continued)
6. Lubricate and install new O-rings to the fittings on the wheel motor. Use the
labels that you attached during the removal process to correctly connect the
hydraulic tubes to the wheel motor fittings; refer to
Hose and Tube (O-Ring Face Seal Fitting) (page 6–11)
.
7. Install the brake assembly, wheel hub, brake drum, and front wheel to the
machine; refer to
Servicing the Brakes (page 8–10)
.
8. Ensure to torque the locknut (item 10 in
) to
407 to 542 N∙m (300
to 400 ft-lb)
.
9. Operate the machine functions slowly until air is out of system; refer to
Charging the Hydraulic System (page 6–151)
.
10. Start the engine, check for hydraulic-fluid leaks, repair any leaks as
necessary, and fill the hydraulic tank with the correct quantity of new hydraulic
fluid before returning the machine to service.
Hydraulic System: Service and Repairs
Page 6–176
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
