Toro Reelmaster 5510 Series, Service Manual

Page: 163 / 662

40 GPM Hydraulic Tester (Pressure and Flow)
Toro Part No. AT40002
Use this tester to test the hydraulic circuits and components
for flow and pressure capacities as recommended in
Testing
the Hydraulic System (page 6–56) . This tester includes the
following:
Load Valve – Turn the valve to restrict the flow to create a
simulated working load in the circuit.
Pressure Gauge – A glycerine filled pressure gauge 0 to
35,000 kPa (0 to 5,000 psi) to provide operating circuit
pressure.
Flow Meter – This meter measures the actual fluid flow in the
operating circuit with a gauge rated at 20 to 150 L/minute (4
to 40 gallons/minute).
Note: This tester does not include the hoses; refer to
Hydraulic Hose Kit (page 6–45) .
Hydraulic Hose Kit
Toro Part No. TOR6007
This kit includes the fittings and hoses that are used to
connect the 40 GPM hydraulic tester (AT40002) or high
flow hydraulic filter kit (TOR6011) to the machine hydraulic
traction system components.
O-Ring Kit
Toro Part No. 117-2727
This kit includes O-rings in a variety of sizes for the face
seal and port seal hydraulic connections. To help prevent
a hydraulic leak, replace the O-rings when you open the
hydraulic connection.
Reelmaster ® 5410/5510/5610 Series Page 6–45 Hydraulic System: Special Tools
15216SL Rev C