Toro Reelmaster 5510 Series, Service Manual, Page: 162 / 662

Special Tools
You can order these special tools from your Toro Distributor. Some tools are
also available from a local tool supplier.
Hydraulic Pressure Testing Kit
Toro Part No. TOR47009
Use this kit to take various pressure readings for diagnostic
tests. Quick disconnect fittings are provided to attach directly
to the mating fittings on the machine test ports without the
tools. A high-pressure hose is given for remote readings.
Contains 1 each: 6,900 kPa (1,000 psi), 34,500 kPa (5,000
psi), and 69,000 kPa (10,000 psi) gauges; refer to
Testing the
Hydraulic System (page 6–56) .
15 GPM Hydraulic Tester Kit (Pressure and Flow)
Toro Part No. TOR214678
Use this tester to test the hydraulic circuits and components
for flow and pressure capacities as recommended in
Testing
the Hydraulic System (page 6–56) . This tester includes the
following:
Inlet Hose – This hose connects the system circuit to the inlet
side of the hydraulic tester.
Load Valve – Turn the valve to restrict the flow to create a
simulated working load in the circuit.
Pressure Gauge – A glycerine filled pressure gauge 0 to
34,500 kPa (0 to 5,000 psi) to provide operating circuit
pressure.
Flow Meter – This meter measures the actual fluid flow in the
operating circuit with a gauge rated at 5 to 55 L/minute (1
to 15 gallons/minute).
Outlet Hose – A hose from the outlet side of the hydraulic
tester that connects to the hydraulic system circuit.
Fittings – An assortment of hydraulic fittings are included
with this kit.
Hydraulic System: Special Tools Page 6–44 Reelmaster ® 5410/5510/5610 Series
15216SL Rev C