Using the InfoCenter Display for Troubleshooting (continued)
In the PTO operation example, the only input is the reel engage switch. If
O
N
and O
FF
do not alternate when the switch is moved back and forth from
E
NABLE
to D
ISABLE
, the switch or the circuit wiring for the switch is damaged
and should be tested as described.
6. Press the menu/back button (as indicated by the
at the bottom of the
screen). Select (highlight) the Qualifiers and press the left/right button (as
indicated by the
at the bottom of the screen).
Note:
All of the qualifiers for the machine operation must be in the desired
condition (
) before the operation Outputs can be energized.
g189684
Figure 217
1.
Qualifier items
3.
Down button
2.
Left/right button
4.
Menu/back button
7. Manually operate each qualifier listed (
). The qualifier condition on
the InfoCenter display should alternate
and
as the qualifiers condition is
changed. If
and
do not alternate during qualifier operation, the qualifier
component or its circuit wiring is damaged and should be tested; refer to
Testing the Electrical Components (page 7–54)
.
CAUTION
It may be necessary to start and run the engine, raise and lower
the cutting units, or otherwise operate the machine during the
troubleshooting process.
Ensure that the machine is in a well ventilated area and keep your
hands and feet away from the cutting units and moving parts while
troubleshooting to prevent personal injury.
In the PTO operation example, the following qualifiers must be in the desired
condition (
) before any operation Outputs can be energized:
• Joystick lower off
• Mow/transport switch in L
OW
(mow) range
• Operator must be in seat (seat switch)
Electrical System: Troubleshooting
Page 7–30
Reelmaster
®
5410/5510/5610 Series
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
