Toro Reelmaster 5510 Series, Service Manual

Page: 535 / 662

Special Tools
You can order these special tools from your Toro Distributor. Some tools may
have been supplied with your machine or are available as Toro parts.
Gauge Bar Assembly
Toro Part No. 108-6715
Use gauge bar to verify
height-of-cut adjustment. Also
used for adjustment of optional
groomer.
1. Used for groomer adjustment
2. Used for height-of-cut
adjustment
Bedknife Screw Tool
Toro Part No. TOR510880
This screwdriver-type bit is made to
fit Toro bedknife attaching screws.
Use this bit with a torque wrench to
secure the bedknife to the bedbar.
IMPORTANT
Important: To prevent
damage to the bedbar,
do not use an air or
manual impact wrench
with this tool.
Handle Assembly
Toro Part No. 29-9100
Used to apply lapping compound
to cutting units while keeping the
operator’s hands at a safe distance
from the rotating reel.
Components for the handle
assembly are available individually
as follows:
• Brush 36-4310
• Handle 29-9080
• Handle cap 2410-18
Reelmaster ® 5410/5510/5610 Series Page 9–5 Cutting Unit: Special Tools
15216SL Rev C