Toro Reelmaster 5510 Series, Service Manual

Page: 611 / 662

Installing the Groomer Reel (continued)
g215593
Figure 384
1. Groomer plate 2. Excluder seal
6. Check that the excluder seals just touch the groomer plate assembly ( Figure
384 ). Position the excluder seals on the groomer shaft if necessary.
7. Check the groomer reel height and mower height-of-cut settings. Adjust
as necessary.
8. Lubricate the groomer bearings.
Note: After greasing the groomer bearings, operate the groomer for 30
seconds, stop the machine, and remove the unwanted grease from the
groomer shaft and seals.
Reelmaster ® 5410/5510/5610 Series Page 10–17 Belt Driven Groomer (Optional): Service and Repairs
15216SL Rev C