Height Adjuster Assembly
g220500
Figure 401
1.
Button-head screw
8.
Washer (2 each)
15.
Compression spring
2.
Detent spring
9.
Locknut
16.
Compression spring
3.
Height adjuster knob
10.
Flange nut
17.
Height-of-cut bracket
4.
Quick up cover
11.
Cotter pin
18.
Flat washer
5.
Quick up lever
12.
Clevis pin
19.
Groomer bumper (left)
6.
Height adjustment bolt
13.
Washer (2 each)
20.
Locknut
7.
Flange-head bolt
14.
Height adjustment rod
21.
Pinch bolt (front roller)
Disassembling the Height Adjuster Assembly
1. Park the machine on a clean and level surface, lower the cutting units
completely to the ground, shut off the engine, set the parking brake, and
remove the key from the key switch.
2. Remove the cotter pins and clevis pins that secure the height adjustment
rods to the groomer gear box and idler arm. Discard the cotter pins.
3. Loosen the 2 height adjustment bolt locknuts.
4. Loosen the 2 front roller pinch bolt locknuts and bolts.
5. Remove the flange nut (item 10 in
) and flange-head bolt that
secure the height adjuster assembly to the cutting unit side plate, and remove
the front roller and height adjuster from the cutting unit.
Reelmaster
®
5410/5510/5610 Series
Page 11–17
Universal Groomer (Optional): Service and Repairs
15216SL Rev C
Summary of Contents for Reelmaster 5510 Series
